How to use a toy with a cumtube?


Cumtubed toys are our popular toys.
In this article, we explain how to use the Cumtubed toy and clean it up after you receive it.
Before and after use:
①Prepare soapy water (soap and warm water), Cumtubed toy and syringe.
②Put the cumtubed toy in soapy water and fill the syringe with soapy water.
③Untie the cumtube, attached the syringe to the cumtube, and insert and tighten.
④Squeeze the syringe, and soapy water is passed through the inside of the cumtube toy, then out of the tip. Repeat 2-3 times to flush the cumtube and complete the internal cleaning.
⑤Replace the clean water and repeat step ④ to complete the internal cleaning. Then apart the syringe and soak them in warm water for about 10 minutes.
※Remember to rinse the cumtube out thoroughly after using it. We also recommend pressing the opening at the opposite end of the toy against a standard water tap or faucet, and flushing it through with warm water. Remember to finger the inside a little bit to make sure the water cleans everything out properly. 
Make sure to leave your toy to air dry thoroughly after cleaning.

Using instructions:
①The syringe attaches to the end of the cumtube, intended to be filled with lube.
②Squeezed to make it shoot cumlube out. Emulates a big, wet, sticky orgasm, simulating that perfect ejaculation excitement.
※Notes: Choosing diluted water-based lube, so as not to cause cumtube blockage. The lube can also be mixed with water to achieve a dilution.

※If there is anything question, please contact us via chat or DM on Twitter.

Shop our product!

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!
This email has been registered